Panasonic KX-TDA100 manual Setting the Handset and Base Unit, Selects the type of PBX that

Setting the Handset and Base Unit

	Main Item	Description		Setting	Default
		Selects the type of PBX that		Type 1*2
	PBX Type				Type 1
		the base unit is connected to.*1		Type 2
		When using a KX-TAW848/KX-		Mode 1
	Fwd/DND Icon
		TDA series PBX, and the PT LED		Mode 2
		patterns for FWD and DND have			Mode 1
		been set reversely on the PBX, you
		need to set Mode 2. (See page 6.)
		Selects which line of information is		1st Line
	Caller ID Line
		displayed as Caller ID. When the		2nd Line
“PBX Type-Type 1
		Caller ID matches an item stored in
				3rd Line
(KX-TAW/TDA series)”		the Phonebook, the handset rings
only		according to the setting of the item.
		As shown below, a caller’s
		number, caller’s name and CO line
		number are displayed on each line.			1st Line
		Displayed items vary depending on
		your PBX and its settings.
		<Example>
		1st Line	T.Edison
		2nd Line	01234567890
		3rd Line	LN-001:
		Sets the current date and time		Date
	Date&Time
		for the base unit.		Time
					01-01-05 (D-M-Y)
“PBX Type-Type 2
					12:00 AM (H:M)
(KX-TA308/TD
series)” only
		Sets each type of Incoming		Single Tone
	Incoming Log
		Call Log to either on or off.*3		On
“PBX Type-Type 2
		You must set at least one of the		Off
(KX-TA308/TD
		incoming call types to on to		Double Tone	Single Tone: Off
series)” only
		store a received call in the		On	Double Tone: Off
		Incoming Call Log.		Off	Triple Tone: Off
				Triple Tone
				On
				Off

*1 After you set the PBX type, disconnect and reconnect the telephone cord. *2 To check the type of PBX you are using, see page 30.

*3 When a check mark is displayed beside a tone type, the incoming call log for that tone type will be logged.

• These settings are only applied to your telephone, not the PBX itself.

34