Panasonic KX-TDA100 manual Operation for KX-TAW848/TDA50/100/200, Making Calls

Operation for KX-TAW848/TDA50/100/200

Desired Function			Operation
			Making Calls
Redial*1			1		OR		1	Talk on the
								Speakerphone.
	To program			X
			idle F-Key (0-9,		, #)
	0			OR		2	phone no.
One-touch
Dialing			idle F-Key
	To dial			X
			One-touch Dialing Key (0-9, , #)
				OR
			One-touch Dialing Key
Calling an		0
operator
	To store
Speed Dialing		3	0	personal speed			desired no.	#
				dial no.
(Personal)	To dial
			2		personal speed
						dial no.
Speed Dialing	To dial
(System)			2	system speed dial no.
	To program		X
			idle F-Key (0-9,	, #)
	0		OR		5	4	Assign as Call Log
Calling back			idle F-Key
a caller using	To dial
the Incoming			X
Call Log		Call Log Key (0-9, , #)
			OR
					desired Incoming
		Call Log Key			Call Log *
	* Caller ID is displayed for about 5 seconds. If you press						during that time period,
	the display goes blank until the time expires. While Caller ID is displayed or the display is blank,
	you cannot receive a call, make a call using				or enter PBX Personal Programming mode.
	To return to the standby display, press				then press		.

*1 You can use the last number stored in the PBX to make calls (Last Number Redial). However, in this case the number will not be stored as a new entry in the Outgoing Call Log.

17