Profile installation instructions JTP18BABB GE Profile 30 Single Wall Oven

Add suitable filler to match adjacent cabinets when needed to maintain toe kick alignment

TM

JTP18BABB - GE Profile™ 30" Single Wall Oven

Undercounter Installation (in inches)

Optional Custom Installation for 30" CleanDesign

(Excluding Induction) or Sealed Burner Gas Cooktop (in inches)

Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cooktop models.

1-1/2" Typical countertop

25

Top and/or side fillers may be necessary if unit is positioned between existing cabinets

	Junction box		Gas		Gas and electrical connections for
					gas cooktop must be located in an
	location		connection
					adjacent accessible location to the right.
	240/208V
		5			For a 36" gas cooktop, the connections
					may be made to the left.
23-1/2" MIN.					120 Volt
Cutout depth					Outlet	1-1/2"
						Countertop
28-1/2'' MIN.
28-5/8'' MAX.	Allow 11/16''
27-1/4'' MIN.				22'' MIN. above
	overlap over side
27-5/16'' MAX.				support platform		36'' MIN.
	edges of cutout
Cutout height
3/4'' Support
platform required
					24

Free space

1-1/2" MIN.

30-7/16

5-9/16" Reference dim. for MAX. support height

with typical 36" countertop

height

27-1/4" MIN.

27-5/16" MAX. Cutout height

Power cord

Junction box(s) for

oven & radiant

cooktop 22" from

floor

36" Typical

Countertop height

22

Reference

5-9/16

Match toe kick height

front and two sides

4'' To 4-1/2 '' Toe kick allowable

Side View

Note: Oven is rated for use only under the following cooktops:

•GE 30" and 36" electric coil and CleanDesign cooktops (Excluding Induction)

•GE 30" and 36" gas standard and sealed burner cooktops

Note: Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for cutout size. See label on back of oven for approved cooktop models.

Installation Information: Before installing, consult installation instructions [Pub. No. 31-10125] packed with product for current dimensional data and for alternate installation options.

Specification Revised 6/99

This installation is to achieve minimum gap between bottom of countertop and control panel. Note: For this installation, the bottom trim will not be flush with a typical 4" toe kick. Note: Cabinets installed adjacent to wall ovens must have an adhesion spec

of at least 194°

For answers to your Monogram,®

GE Profile Performance Series,™

GE Profile™ or GE appliance questions, call

GE Answer Center® service, 800.626.2000.

Listed by

Underwriters

RLaboratories