Fostex Complete Guide to Installing and Formatting a Hard Disk for D-160

D-160 Owner's Manual (Before operating the D-160)

Installing a removable hard disk cartridge

A hard disk cartridge is not installed in the D-160 when it is shipped. You will need to install a removable hard disk cartridge in the D-160. (You can use an optional Model 9041 or a hard disk that has been approved for performance and installed in the removable case that came with the D-160.)

Follow the procedure below to install a new hard disk cartridge. Be sure to format the hard disk. The following procedure should be performed with the power to the D-160 turned off.

1. Remove the blank panel from the cartridge slot.

POWER

<CAUTION>

Do not try to insert your fingers into the removable hard disk cartridge drive after the cartridge has been removed. Otherwise, electric shock or unexpected injury could result.

DIGITAL MULTITRACK RECORDER D-160		The unit is
		shipped from
		the factory
		with the lock
		on the right
1	Unlock	of the slot
		released.
Blank panel

2.Insert the hard disk cartridge (e.g., Model 9041) into the slot.

Make sure that you insert the cartridge until it clicks into place. Be sure to remove the dust cap on the connector of the cartridge case before inserting the cartridge.

DIGITAL MULTITRACK RECORDER D-160

POWER

Model 9041 2

3. Lock the cartridge with the key included in the package.

DIGITAL MULTITRACK RECORDER D-160

POWER

3

Lock

4. Connect the connector of the detachable controller, and install the controller to the D-160.

4

D-160

AUTO RTN

DIGITAL MULTITRACK RECORDER

CLIPBOARD

AUTO PUNCH

EXECUTE

EXIT

AUTO PLAY

IN

OUT

START

IN

OUT

END

DISP SEL

/YES

/NO

AUTO RTN

TIME BASE SEL

COPY

MOVE

PASTE

ERASE

UNDO

REDO

HOLD/

STORE

RECALL

POWER

PGM CHANGE

AUTO

REHEARSAL

PUNCH

LOCATE

VARI PITCH

TAKE

RECORD TRACK

RECORD

STOP

PLAY

REWIND

F FWD

1/9

2/10

3/11

4/12

5/13

6/14

7/15

8/16

SHIFT

PUNCH

IN / OUT

LOCKED

HD ACCESS

MTC IN

CLIPBOARD PLAY

LOCATE ABS 0

LOCATE ABS END

*When installation is completed, follow the procedure “Formatting a hard disk” on page "43" to format the hard disk.

*If you are using a hard disk (that has been approved for performance) and installing it in the removable case that came in the package, refer to “Installing a hard disk in the removable case” on page "42."

40