Fostex D-160 owner manual Punch In/Out Rehearsal Using a foot switch, End of rehearsal

D-160 Owner's Manual (Punch In/Out)

2-1. Punch In/Out Rehearsal (Using a foot switch)

Rehearsal

1.Press the foot switch once while holding down the STOP button.

The D-160 will enter the "Rehearsal" mode, and the 35 dot display on the upper row of the screen will show "Rehearsal On" for one second. Only the REHEARSAL LED (green) will blink.

2.Press the RECORD TRACK select key “3” to set Track 3 to ready mode. (Indicator “3” will flash.)

3.Press the PLAY button at a location just before the punch in point to play back data.

4.Rehearse the guitar part while playing back the drum and bass sounds.

5.Press the foot switch once at the Punch In point, and press the foot switch again at the Punch Out point. The following diagram illustrates this operation.

You will hear the guitar sound you are playing only between the punch in and out points.

Rehearsal mode (manual Punch In/Out)

PUNCH IN point PUNCH OUT point

All tracks are under REPRO	Only Track 3 enters INPUT monitoring
monitoring status.	status. (However, the D-160 will not
	record any data in Rehearsal mode.)

All tracks are under REPRO monitoring status.

		Press the foot			Press the foot
		switch once.			switch again.
RECORD TRACK display	3	Blink		3	Light up	3	Blink
REHEARSAL LED	REHEARSAL LED will blink		REHEARSAL LED will blink			REHEARSAL LED will blink
TAKE LED
			PLAY
PLAY button LED	PLAY			PLAY LED will light up		PLAY
	PLAY LED will light up					PLAY LED will light up
RECORD button LED			RECORD
				RECORD LED will blink

End of rehearsal

1.Press the foot switch again while holding down the STOP button to cancel Rehearsal mode.

The 35 dot display on the upper row of the screen will show "Rehearsal Off" for one second. Also, the REHEARSAL LED (green) will turn off, indicating that you have quit the Rehearsal mode.

82