Fostex D-160 owner manual Auto Play mode, Auto Return mode

D-160 Owner's Manual (Locate function)

3. Auto Play mode

Turn the Auto Play mode on before using the Direct Locate function, and the D-160 will automatically start playback from the located point .

The diagram below illustrates this operation.

To turn Auto Play mode on, press the AUTO PLAY/AUTO RTN key so that the AUTO PLAY LED will light up. To cancel this mode, press the AUTO PLAY/AUTO RTN key again so that the AUTO PLAY LED will go off.

*Refer to page "15" "Names and Functions" for instructions on using the AUTO PLAY and AUTO RTN keys.

AUTO PUNCH IN point

LOCATE

AUTO PUNCH IN key -> LOCATE key

PLAY BACK

LOCATE

AUTO PUNCH IN key -> LOCATE key

LOCATE point

You can set the preroll point within a range of 0 to 10 seconds (Refer to page "149" for details.)

4. Auto Return mode

To turn Auto Return mode on, press the AUTO PLAY/AUTO RTN key so that the AUTO RTN LED will light up.

To use the Auto Return function, first you need to specify the Auto Return Start point and Auto Return End point.

As shown in the diagram below, the D-160 will play back data to the Auto Return End point, then automatically locate the Auto Return Start point, and then stop.

<Note>

The start point will not be located after the AUTO RTN END point is reached when the D-160 is in record mode.

AUTO RTN START point AUTO RTN END point

PLAY BACK

LOCATE

STOP point

You can set the preroll point within a range of 0 to 10 seconds (Refer to page "149" for details.)

70