D-160 Owner's Manual (MIDI sync function)

*If correct sync cannot be obtained, re-check the connections/cables and setting of both equipment.

<Note>

In the D-160, the "ABS 0" position is set at "002BAR/1BEAT /00CLK."

This setting is made in consideration of the time required (it will not sync immediately) for the MIDI sequencer, etc. to enter into sync.

As a result, if the D-160 is played back from ABS 0 (LOCATE ABS 0), sync will be completed by the time it reaches the first bar, and will thus synchronize from head of the tune.

Execution of recording

Various ways of recording can be conducted while synchronizing the D-160 and the MIDI sequencer with the MIDI clock.

119

Page 119
Image 119
Fostex D-160 owner manual 119, Execution of recording