Fostex D-160 owner manual Storing the Punch Out point, Hints

D-160 Owner's Manual (Punch In/Out)

Storing the Punch Out point

8

5, 6

D-160

AUTO RTN

DIGITAL MULTITRACK RECORDER

CLIPBOARD

AUTO PUNCH

EXECUTE

EXIT

AUTO PLAY

IN

OUT

START

IN

OUT

END

DISP SEL

/YES

/NO

AUTO RTN

TIME BASE SEL

COPY

MOVE

PASTE

ERASE

UNDO

REDO

HOLD/

STORE

RECALL

7

PGM CHANGE

AUTO

REHEARSAL

PUNCH

LOCATE

VARI PITCH

TAKE

RECORD TRACK

RECORD

STOP

PLAY

REWIND

F FWD

1/9

2/10

3/11

4/12

5/13

6/14

7/15

8/16

SHIFT

PUNCH

IN / OUT

LOCKED

HD ACCESS

MTC IN

CLIPBOARD PLAY

LOCATE ABS 0

LOCATE ABS END

6

5.Press the HOLD/> key to enter edit mode.

6.Press the HOLD/> key or turn the SHUTTLE dial to select the digit you wish to edit, then use the JOG dial to change the time value.

For example, setup the Auto Punch Out point to "3 minutes, 35 seconds, 15 frames".

7.Press the STORE key. (The STORE LED will light up.)

8.Press the AUTO PUNCH OUT key.

The specified time value will be stored as a Punch Out point, and the STORE LED will go off.

*To check the stored Punch In/Out point, press the RECALL key, and then press the AUTO PUNCH IN key and/or the AUTO PUNCH OUT key.

Alternatively, press the AUTO PUNCH IN/AUTO PUNCH OUT key. The display will show the stored time value.

<Note>

You cannot set the Punch Out point before the Punch In point location.

If the Punch Out point precedes the Punch In point and you try to "punch in," the message "Void Out Point!" appears on the screen immediately after you press the AUTO PUNCH key, indicating that the time value of the Punch Out point is inappropriate. Be sure to specify a larger value for the Punch Out point than for the Punch In point.

<Hints>

If “ Resolution” menu (Bar/Beat Resolution mode) has been turned on in the Setup mode when the “BAR/BEAT/CLK” Time Based is being used, press the HOLD/> key or the STORE key to hold the current bar/beat clock value on the display, and you can round off the clock value to “00” (that is, to a bar/beat value). This function is useful when you wish to use the memory data in beat steps.

*Refer to page "*160" for more information on " Resolution" menu in Setup mode.

77