Fostex D-160 owner manual Rear Panel

D-160 Owner's Manual (Names and Functions)

40. Hard disk access LED

This LED lights up or blinks when the hard disk is writing or reading data.

<CAUTION>

Do not turn the power off while this LED is lit or blinking. Otherwise, data on the hard disk may

be damaged.

41. MIDI Time Code In LED [MTC IN]

This LED lights up when MTC (MIDI Time Code) is input from an external MIDI device to the MIDI IN connector of the D-160.

42. Punch In/Out jack [PUNCH IN/OUT] (Connector: PHONE jack)

Connecting the optional foot switch will let you control punch In/Out (and rehearsal) recording. Use a Fostex Model 8051 foot switch.

<Note>

Be sure to use an “unlatch type” foot switch if you use a foot switch other than the Model 8051. Otherwise, a malfunction could occur.

* Refer to page "81" for information about Punch In/Out recording using the foot switch.

<Rear Panel>

49 50 51

	CAUTION
	RISK OF ELECTRIC SHOCK
AVIS	DO NOT OPEN
	NE PAS OUVRIR
	:RISQUE DE CHOC ELECTRIQUE

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE THIS EQUIPMENT

TO RAIN OR MOISTURE.

	ANALOG IN						ANALOG OUT						DATA	OPTICAL	SCSI		MIDI
4	3	2	1	8	7	6	5	4	3	2	1	INPUT		OUTPUT
												9~16	1~8	9~6	1~8	INPUT	OUTPUT	THRU
8	7	6	5	16	15	14	13	12	11	10	9

43 44 45 46 47 48

43. Input jack [ANALOG IN 1-8] (connector: RCA pin)

Analog audio signal from the mixer is routed here.

Connect this jack to the Group out (BUSS OUT) connector of the mixer.

44. Output jack [ANALOG OUT 1-16] (connector: RCA pin)

Analog audio signal of the D-160 is output here.

Connect this jack to the TAPE IN connector of the mixer.

45. Data Input connector [DATA INPUT 1-8, 9-16] (connector: OPTICAL)

Use this connector to load song data (audio + setup data) from an external device to the D-160. It is also used to input S/P DIF digital signal (from a DAT, CD, or MD) or adat digital signal (from RD-8, CX-8, or adat). DATA INPUT 9-16 is constantly fixed to "adat" input.

*Refer to pages "102" and "165" for information about "LOAD" function.

*Refer to page "60" for information "Digital Recording."

23