Fostex owner manual Default setting on the D-160, Outline of the Initial Settings

D-160 Owner's Manual (Recording /Playback)

2. Default setting on the D-160

Before you start operating the D-160 or proceed to the next step, you may want to arrange the controls and switches to restore the initial setting so that you will not, for example, erase important data on a track by using incorrect settings.

In this manual, this procedure is called "setting defaults." For default settings, the controls and switches should be arranged as shown in the figure below.

Make it a rule to return to these default settings before you proceed to a new step.

*"FORMAT FIRST". You need to format the internal hard disk prior to start recording if a brand new hard disk drive has been installed. Refer to the explanation of the "Disk Format?" menu in the Setup mode. We recommend that you format the hard disk as often as possible before you start fresh recording on it.

However, remember that the format process will erase all of the recorded song data.

Outline of the Initial Settings:

*Turn all the RECORD TRACK select keys to "SAFE." (Track indication is turned off.)

*Auto Return/Auto Play mode is "OFF." (The AUTO RTN/AUTO PLAY LEDs are off.)

*Auto Punch mode is "OFF." (The REHEARSAL/TAKE LEDs are off.)

*The STOP button LED is lit.

*The STORE key and the RECALL keys are "OFF." (The STORE/RECALL LEDs are off.)

*"Rec Protect?" is "Off" selected in Setup mode.

*"Digi. In?" is assigned to "L: - -, R: - -" in Setup mode.

*"Slave Mode?" is "Off" selected in Setup mode.

*Setting a Program for recording/playback (See 2-1, 2-2, 2-3.)

*Setting a sampling rate for recording/playback (See 2-4.)

*Turning off the Vari-pitch function. (The LED is turned off.)

*The LED of the SHIFT key is off.

When the Recording Enabled/Disabled parameter in the Setup mode is set to "DISABLE rEc," pressing the RECORD button and the PLAY button will not start recording, and the unit will display "DISABLE rEc" on the panel. Be sure to set the mode to "EnAbLE rEc" to enable the recording function.

Auto Return/Auto Play mode is "OFF." (The

AUTO RTN/AUTO PLAY LEDs are off.)

The display Time Base is set to ABS

TIME, and Program P1 is selected.

Auto Punch mode is "OFF." (The REHEARSAL/TAKE LEDs are off.)

The STORE key and the

RECALL keys are "OFF." (The

STORE/RECALL LEDs are off.)

DIGITAL MULTITRACK RECORDER D-160

POWER

				RECORD TRACK
1/9	2/10	3/11	4/12	5/13	6/14	7/15	8/16	SHIFT
PUNCH
IN / OUT
		LOCKED		HD ACCESS		MTC IN

Turn all the RECORD TRACK select keys to "SAFE." (Track indication is turned off.)

AUTO RTN
	CLIPBOARD			AUTO PUNCH				EXECUTE	EXIT
AUTO PLAY	IN	OUT	START	IN	OUT	END	DISP SEL	/YES	/NO
				AUTO RTN			TIME BASE SEL
COPY	MOVE		PASTE	ERASE	UNDO	REDO	HOLD/	STORE	RECALL
AUTO							PGM CHANGE
	REHEARSAL
PUNCH				LOCATE	VARI PITCH
	TAKE
RECORD	STOP		PLAY	REWIND	F FWD
	CLIPBOARD PLAY
	LOCATE ABS 0
	LOCATE ABS END

Turning off the Vari-pitch function. (The LED is turned off.)

The LED of the SHIFT key is off.

The STOP button LED is lit.

48