Fostex D-160 owner manual Move & Paste, Moving

D-160 Owner's Manual (Edit function)

2. Move & Paste

The Move & Paste function “moves” sound data to the Clipboard, and “pastes” the data in the same track or another track. You can specify the number of repeats of the paste operation (1-99) to paste data repeatedly. The difference between the Copy & Paste and the Move & Paste operation is that, after the Move & Paste operation, the source data and the data on the Clipboard will be removed. You can use this function with any Time Base.

*To perform the Move operation, you first need to set the start point (Clipboard In point) and the end point (Clipboard Out point) of the data to be moved, and the move source track. To perform the Paste operation, you need to set the start point (Auto Punch In point) and the paste destination point.

<Note>

The data on the Clipboard will be replaced by new data each time you press the

COPY key or the MOVE key.

2-1. Moving

First, you need to specify the area to be moved (using the Clipboard In/ Out points and move track).

*The following procedure is based on data with the ABS Time Base.

To change the Time Base to MTC or MIDI BAR/BEAT/CLK, press the DISP SEL key while pressing and holding down the EXECUTE/YES key.

*Before you start working, restore the default settings on the D-160.

*Do not change Programs or sampling rates until a session is complete.

PUNCH IN / OUT

		1, 3								3, 6
				4, 6
	D-160	AUTO RTN
DIGITAL MULTITRACK RECORDER			CLIPBOARD			AUTO PUNCH				EXECUTE	EXIT
		AUTO PLAY	IN	OUT	START	IN	OUT	END	DISP SEL	/YES	/NO
						AUTO RTN			TIME BASE SEL
		COPY	MOVE		PASTE	ERASE	UNDO	REDO	HOLD/	STORE	RECALL

AUTO

PGM CHANGE

1, 4

REHEARSAL

PUNCH

LOCATE

VARI PITCH

TAKE

RECORD TRACK

RECORD

STOP

PLAY

REWIND

F FWD

1/9

2/10

3/11

4/12

5/13

6/14

7/15

8/16

SHIFT

LOCKED

HD ACCESS

MTC IN

CLIPBOARD PLAY

LOCATE ABS 0

LOCATE ABS END

7 8 2, 5

Entering and storing the CLIPBOARD IN point

1.Press the RECALL key, and then the CLIPBOARD IN key (or press only the CLIPBOARD IN key). The D-160 will enter the edit mode.

2.Move the cursor to the digit you wish to change using the HOLD/> key or the SHUTTLE dial, and change the value using the JOG dial.

3.After setting the value, press the STORE key, and then the CLIPBOARD IN key.

The time value will be stored as the Clipboard In time, the edit mode will disengage, and the display will return to the previous screen.

91