Fostex D-160 owner manual Detachable Controller, Lock/Unlock key, Meter display

D-160 Owner's Manual (Names and Functions)

<Note>

The D-160 package contains a removable case (without a hard disk). Install your hard disk in this removable case.

The optional Model 9041 (1.3GB removable hard disk cartridge) contains a hard disk, which allows you to record and play back about 15 minutes of data (16-tracks recording, FS: 44.1 kHz) without having to install a case.

*Refer to page "39" for more information on the hard disk models that have already been ested for operation on the D-160.

7.Lock/Unlock key

When you remove or install the hard disk cartridge, you need to lock/unlock here using the included key.

<Note>

Be sure to turn the power off to the D-160 before locking or unlocking.

<Detachable Controller>

				12	14		17
8	9	10	11	13		16	15	18	19
		D-160	AUTO RTN
	DIGITAL MULTITRACK RECORDER			CLIPBOARD		AUTO PUNCH			EXECUTE	EXIT
			AUTO PLAY	IN OUT	START	IN	OUT END	DISP SEL	/YES	/NO
						AUTO RTN		TIME BASE SEL		20
			COPY	MOVE	PASTE	ERASE	UNDO REDO	HOLD/	STORE	RECALL

																			21
												TAKE							PGM CHANGE
											AUTO								22
											PUNCH	REHEARSAL				LOCATE	VARI PITCH
					RECORD TRACK						RECORD		STOP		PLAY	REWIND	F FWD		23
42	1/9	2/10	3/11	4/12	5/13	6/14	7/15	8/16	SHIFT
	PUNCH
	IN / OUT
			LOCKED		HD ACCESS		MTC IN						CLIPBOARD PLAY
													LOCATE ABS 0
													LOCATE ABS END
			39		40	41			31	34		35		36		37	38	25	24
										32	30		29		28 33			26
																	27

8. Meter display

This meter display shows the signal level and settings.

*Refer to the “Display section” on page "25."

9.Record Track Select key [RECORD TRACK]

The Record Track Select key selects "SAFE-READY" for the recording track.

When you press this key once, the track enters the READY status, and the track indication on the display will blink. Pressing it again changes this status to "SAFE" and the track indication will go out. When you start recording, the blinking track indication illuminates.

When you press only the RECORD button while the track is in the READY status, the track becomes an input monitor, allowing you to adjust the recording level.

Pressing only the RECORD button again, and the track become a reproduction monitor. This key is also used to select a track for the Copy & Paste, Move & Paste, Erase, or other editing operation.

* Refer to page "37" for details about the reproduction monitor and the input monitor.

14