Fostex D-160 owner manual Auto Repeat mode

D-160 Owner's Manual (Locate function)

5. Auto Repeat mode

The Auto Repeat function is a combination of the Auto Play mode and the Auto Return mode. To access the Auto Repeat function, press the AUTO PLAY/AUTO RTN key so that both AUTO RTN LED and AUTO PLAY LED light.

You also need to set the Auto Return Start point and the Auto Return End point, as you did for the Auto Return function. (Refer to the previous section "Auto Return" for information on setting the Start and End points.)

With the Auto Repeat function, the D-160 plays data up to the Auto Return End point, then automatically locates the Auto Return Start point, and plays back data between the Start and End points repeatedly, until you cancel playback using the STOP button.

*Refer to page “15” of "Names and Functions" for instructions on using the AUTO PLAY and AUTO RTN keys.

AUTO RTN START point AUTO RTN END point

PLAY BACK

LOCATE

LOCATE point

You can set the preroll point within a range of 0 to 10 seconds (Refer to page "149" for details.)

<Hints>

Using the Auto Repeat function when you are rehearsing Auto Punch In/ Out recording, allows you to rehearse as many times as you want without tedious operations. For example, by setting the Start point just before the Auto Punch In point and the End point just before the Auto Punch Out point, you do not need to worry about locating the data and can concentrate on rehearsing.

AUTO PUNCH IN point	AUTO PUNCH OUT point
AUTO RTN START point		AUTO RTN END point
	Rehearsal area
PLAY BACK		PLAY BACK

Rehearsal will be repeated automatically as many times

as you like to make it easier to adjust the recording level.

74