Fostex D-160 owner manual Compatibility with D-90, D-80 V2.0, DMT-8 V2.0, and DMT-8, 116

D-160 Owner's Manual (Saving and loading data)

4. Compatibility with D-90, D-80 V2.0, DMT-8 V2.0, and DMT-8

"FDMS-3 (Fostex Disk Management System-3)" for recording format of the D-160, and "FDIO-1 Ver2.0 (Fostex Data In/Out-1 Ver2.0)" for save/load format of song data, are employed. In the D-90, "FDMS-2 Ver2.0" and "FDIO-1 Ver2.0," in the D-80/D-80 Ver2.0 and DMT-8VL, "FDMS-2" and "FDIO-1", furthermore, in the DMT-8, "FDMS-1" and "FDIO- 1," respectively, are employed.

Due to these conditions, the hard disk recorded in the D-160 cannot be installed and used in another equipment. However, as the save/load format is same for the D-160 and D-90, data saved from the D-160 to an external digital equipment (adat or DAT) can be loaded in 8 track units to the D-90 or data saved in the D-90 can be loaded in D-160. Refer to list below for functional comparison of each product.

During save/load using DAT and Adat, independent save/load in 8 track units is possible. In this case, the data in 8 track units are not distinguished as tracks 1~8 or 9~16 but simply handled as eight track data.

Therefore, because this 8 track data is compatible with the D-90 if it is in 8 track units (any one combination of 1~8, 9~16 or 17~24), data saved from the D-160 can be loaded in tracks 1~8 of the D-90.

In this case, data in the tracks which were not loaded will remain intact.

			D-80 V2.0
	D-160	D-90	DMT-8V2.0	DMT-8
			DMT-8VL
Program	99 (P1~P99)	9 (P1~P9)	5 (P1~P5)	1 (P1)
	00: 00: 00: 00: 00	00: 00: 00: 00: 00	00: 00: 00: 00: 00	00: 00: 00: 00: 00
Editing the memory data	~	~	~	~
	23: 59: 59: 29: 59	23: 59: 59: 29: 59	06: 00: 00: 00: 00	06: 00: 00: 00: 00
Setting of the time base
Backup of the time memory
SETUP mode
Sampling frequency	44.1/48kHz	44.1/48kHz	44.1kHz	44.1kHz
Setting of the time signature	(64 points)	(64 points)	(64 points)	(16 points)
Setting of the tempo	(64 points)	(64 points)	(64 points)	(32 points)
Metronome function
Loading/Saving	adat, S/P DIF, SCSI	adat, S/P DIF	S/P DIF	S/P DIF
the song data	(P1~P99)	(P1~P9)	(P1~P5)	(P1)
Setting of the preroll time
Setting of MIDI sync output signal
Setting of the MTC frame rate
	00: 00: 00: 00: 00	00: 00: 00: 00: 00	00: 00: 00: 00: 00	00: 00: 00: 00: 00
Setting of the MTC offset time	~	~	~	~
	23: 59: 59: 29: 59	23: 59: 59: 29: 59	06: 00: 00: 00: 00	06: 00: 00: 00: 00
Setting of the MTC offset mode
Setting of the Rec protect
Setting of the digital input track	(adat, S/P DIF)	(adat, S/P DIF)	(S/P DIF)
Setting of the digital output track	(adat, S/P DIF)	(adat, S/P DIF)	(S/P DIF)
Setting of the bar/beat
resolution mode
Setting of the slave mode
Setting of the slave type
Setting of the MIDI device ID
Setting of the Undo function

116