Fostex D-160 owner manual Message Erase appears on the display, and SURE? flashes

D-160 Owner's Manual (Edit function)

3-1. How to Erase data for a specific part between ABS 0 and ABS END

Storing the erase start point (Auto Punch In point) and the erase end point (Auto Punch Out point)

Refer to “1. Storing memory data,” to set the Auto Punch In/Out points. Here, we use the procedure to “edit the stored data.”

PUNCH IN / OUT

DIGITAL MULTITRACK RECORDER D-160

				RECORD TRACK
1/9	2/10	3/11	4/12	5/13	6/14	7/15	8/16	SHIFT
		LOCKED		HD ACCESS		MTC IN
			9

				5, 8				3, 7
			1, 4					11
AUTO RTN
	CLIPBOARD			AUTO PUNCH				EXECUTE	EXIT
AUTO PLAY	IN	OUT	START	IN	OUT	END	DISP SEL	/YES	/NO
				AUTO RTN			TIME BASE SEL
COPY	MOVE		PASTE	ERASE	UNDO	REDO	HOLD/	STORE	RECALL

AUTO				PGM CHANGE	1, 5
PUNCH	REHEARSAL		LOCATE	VARI PITCH
	TAKE
RECORD	STOP	PLAY	REWIND	F FWD
	CLIPBOARD PLAY
	LOCATE ABS 0
	LOCATE ABS END
		10		2, 6

1.Press the AUTO PUNCH IN key. (Or, press the RECALL key, then press the AUTO PUNCH IN key.)

The time value of the Auto Punch In point (bar/beat/clock) appears and the D-160 will enter the data edit mode.

2.Use the HOLD/> key or the SHUTTLE dial to move among the digits of the time value (bar/beat/ clock), and use the JOG dial to change the value.

3.Press the STORE key. (The STORE LED lights up.)

4.Press the AUTO PUNCH IN key.

The changed time value (bar/beat/clock) is stored as a new Auto Punch In point, and the Time Base indication will appear on the display. (The STORE LED turns off.)

5.Press the AUTO PUNCH OUT key. (Or, press the RECALL key, then press the AUTO PUNCH OUT key.)

The time value of the Auto Punch Out point (bar/beat/clock) will appears and the D-160 will enter the data edit mode.

6.Use the HOLD/> key or the SHUTTLE dial to move among the digits of the time value (bar/beat/ clock), and use the JOG dial to change their value.

7.Press the STORE key. (The STORE LED lights up.)

8.Press the AUTO PUNCH OUT key.

The changed time value (bar/beat/clock) is stored as a new Auto Punch Out point, and the Time Base indication appears on the display. (The STORE LED turns off.)

*To check the Auto Punch In/Out points, press the ATUO PUNCH IN/OUT keys respectively. Or, press the RECALL key, and then press the AUTO PUNCH IN/OUT keys respectively. The display will indicate the time value (bar/beat/clock) stored for the Auto Punch In point or Auto Punch Out point.

Executing the erase operation

9.Press the RECORD TRACK select key for any track(s) you wish to erase (up to 16 tracks) so that the corresponding track(s) enter “READY” mode.

10.Press the ERASE key.

The message “Erase” appears on the display, and “SURE?” flashes.

11. Press the EXECUTE/YES key.

This executes the erase operation. The display will indicate “Wait Erasing!”. When the erase operation is complete, the message “COMPLETED!” will light along with the message “Erase.”

97