Fostex D-160 owner manual Midi Input/Output/Thru connector Midi INPUT/OUTPUT/THRU, Power cable

D-160 Owner's Manual (Names and Functions)

<Note>

Use the DATA INPUT 1-8 connector to load song data to the D-160.

Do not use the DATA INPUT 9-16 connector with load .

46. Data Output connector [DATA OUTPUT 1-8, 9-16] (connector: OPTICAL)

Use this connector to save song data (audio + setup data) from the D-160 to an external device. It is also used to output S/P DIF digital signal or adat digital signal to an external digital device. DATA OUTPUT 9-16 is constantly fixed to "adat" output.

<Note>

Use the DATA OUTPUT 1-8 connector to save song data from the D-160.

Do not use the DATA OUTPUT 9-16 connector with save.

*Refer to pages "102" and "168" for information about "SAVE" function.

*Refer to page "60" for information "Digital Recording."

47.SCSI connector [SCSI] (connector: D-sub 25-pin)

This is the connector which enables an external SCSI device to be connected.

It allows you to save or load song data.

Use the D-sub 25-pin cable for Macintosh designated by each SCSI device.

*Refer to pages "108" and "166" for information about "SCSI."

48.MIDI Input/Output/Thru connector [MIDI INPUT/OUTPUT/THRU]

(connector: DIN 5-pin)

MIDI INPUT:

Connect the MIDI OUT connector of an external MIDI device here.

The D-160 can be controlled remotely via an external MMC (MIDI Machine Control) or FEX (Fostex System Exclusive Message).

MIDI OUTPUT:

Connect the MIDI IN connector of the external MIDI device here.

The D-160 will output MTC (MIDI Time Code), MIDI Clock signal, MMC (MIDI Machine Control) response, and FEX (Fostex System Exclusive Message) response.

MIDI THRU:

This connector outputs the input signal at the MIDI INPUT connector without modification. When using multiple D-160s via MIDI, connect this terminal to the MIDI INPUT connector of the second D-160. Refer to page "117" for details.

49. Panel A for an optional card

This is the panel used for installing the optional Model 5041 (balanced 8-16 I/O card). Using the Model 5041 allows for balanced analog signal input and output. In general, leave the panel in place.

50. Panel B for an optional card

This is the panel used for installing the optional Model 8345 (D-160 TC/SYNC card). Using the Model 8345 makes the D-160 have LTC input and output connectors.

Also, the sync lock with video and word clock will be possible. In general, leave the panel in place.

51. Power cable

Connect the power cable to an AC outlet of the specified voltage.

24