Fostex D-160 Digital Out Track Setting Digi. out?, 159, With the JOG dial, choose Digi.out?

D-160 Owner's manual (SETUP mode)

2-16. Digital Out Track Setting (“Digi. out?”)

This mode sets up the outgoing digital signal from the D-160 with what type and which recorded tracks. The D-160 can digitally transmit the recorded audio as it is to external digital equipment. When you use this function, set the identical sampling frequency on the external digital equipment as the D-160 sampling frequency.

*Initial setting : adat

*Available setting : adat, Lch 1 ~ 16, Rch 1 ~ 16

*This setting is commonly applicable to all programs.

*This setting cannot be saved or loaded.

*The setting is memorized even when the power is off.

<Note>

S/P DIF output (1 ~ 16) will all be output from DATA OUTPUT 1-8.

DATA OUTPUT 9-16 is constantly fixed to "adat" output.

1.Press the DISP SEL key and choose the flashing SETUP mode on the display. Then, press the EXECUTE/YES key.

The SETUP display will stop flashing.

2.With the JOG dial, choose “Digi.out?”.

The “?” display will start flashing. The display will also show the current setting. In the case of the initial setting, it will show “adat”.

3.Press the EXECUTE/YES key.

The current setting will start to flash which indicates it is ready to change setting.

																SETUP
OL
0
3
6																44.1kHz
9
12
18
24
30
42
∞
_	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16

4-A. If you want to choose an SPDIF digital signal, when the Lch display is flashing, choose the track you want with the JOG dial.

Then, use the HOLD/> key or SHUTTLE dial to move to the Rch. Using the same method for choosing the Lch, choose the track in the Rch.

If you choose normal numerical pairs such as “L01-R02”, “L03-R04”, ........“L13-R14”, “L15-R16”,

a two channel stereo signal will be transmitted in SPDIF digital audio format.

In this case, the odd channels will be directed to the Lch and even channels to the Rch accordingly.

<Note>

You cannot assign the same track to both Lch and Rch. If you accidentally do this, the Lch setting will be effective and the D-160 will automatically cancel the Rch track assignment to “- -” as nothing is assigned. For example, if you chose channel 02 for both Lch and Rch and pressed the EXECUTE/YES key, the D-160 would automatically assign as “L02 - R- -”.

4-B. In the case that you want to choose an adat signal, when the Lch display is flashing, choose “adat” with the JOG dial. As you cannot choose “adat” while the Rch display is flashing, use the HOLD/> key or SHUTTLE dial to move to the Lch.

All 16 track signals will be transmitted in adat digital format.

*The adat digital output signal will be assigned as tracks 1 ~ 8 to DATA OUTPUT 1-8 and tracks 9 ~ 16 to DATA OUTPUT 9-16 accordingly.

5.Press the EXECUTE/YES key to register the tracks you have chosen.

The display will go back to the display of Item 2.

6.Press the STOP button or EXIT/NO key to come out of this mode.

*Press either the STOP button or EXIT/NO key to return from the second step menu to the first or to quit SETUP mode. The menu will go backwards each time you press either key so that you can correct the setting, choose some other SETUP mode or eventually return to the normal time base display.

159