Fostex D-160 167, Load from Scsi Back Up Data Load, Insert the second disk in the Scsi device

D-160 Owner's manual (SETUP mode)

With the JOG dial, choose a program which you want to load the song data back on to. If you choose a program which has no data, the display will show “0MB”. If you want to load the data onto a new program rather than to the program already available, choose “New PGM”.

8-c. Press the EXECUTE/YES key after you have chosen the program number.

The D-160 will start loading the song data you have chosen in 6-c to the program number you have chosen in 7-c.

When the D-160 has successfully loaded song data, “COMPLETED!” will be displayed. Press the EXIT/NO key to cancel the message and return to the normal time base display.

Warning

Be careful that If you choose “ALL” in the loading song/program options and start loading the data, all the prerecorded material stored in the internal hard disk will be erased even though you have set the “Rec Protect” mode to ON in the SETUP mode.

Load from “SCSI” (Back Up Data Load)

The example described here is loading back up data “B01” which is saved on to two SCSI disks. Let’s assume the first disk (DISK 1) has already been inserted in the SCSI device.

5-d. Choose “SCSI” with the JOG dial and press the EXECUTE/YES key.

The display will show “LOAD”.

The D-160 will also show “B01[Title] D1” on the display, which means;

B01(flashing)	: back up number currently chosen on the loading source
D1	: disk number 1

6-d. Press the EXECUTE/YES key once again.

The display will start flashing “SURE?”.

The display will also start flashing the currently chosen load target program number on the internal hard disk drive. With the JOG dial, choose a program which you want to load the song data back on to. If you choose a program which has no data, the display will also show “0MB”. If you want to load the data to a new program rather than to the program already available, choose “New PGM” at this stage.

7-d. Press the EXECUTE/YES key after you have chosen the program number.

The D-160 will start loading the back up data “B01” onto the program number you chose in 6-d. When finishing loading data from the first disk, the D-160 will show “Insert Disk 2” and eject Disk 1 automatically.

8-d. Insert the second disk in the SCSI device.

The D-160 will automatically start loading from the second disk.

When the D-160 has successfully loaded the song data, “COMPLETED!” will be displayed. Press the EXIT/NO key to cancel the message and return to the normal time base display.

*Press either the STOP button or EXIT/NO key to return from the second step menu to the first or to quit SETUP mode. The menu will go backwards each time you press either key. If you press these keys after you have started the loading process, only the data that has already been loaded will be effective. The data that has not yet been loaded will be invalid.

167