D-160 Owner's Manual (Punch In/Out)

Rehearsal mode (Auto Punch In/Out)

AUTO PUNCH IN point

AUTO PUNCH OUT point

 

All tracks are under REPRO

monitoring status.

Only track 3 enters INPUT monitoring

status. (However, the D-160 will not

record and data in Rehearsal mode.)

All tracks are under REPRO

monitoring status.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RECORD TRACK display

 

3

Blink

 

 

3

Light up

 

 

3

Blink

 

 

 

 

 

 

 

 

 

 

 

 

 

REHEARSAL LED

REHEARSAL LED will light up.

 

REHEARSAL LED will light up.

 

REHEARSAL LED will light up

TAKE LED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PLAY button LED

 

 

 

 

PLAY

 

 

 

 

 

PLAY

 

 

 

PLAY LED will light up

 

PLAY

 

 

 

 

 

 

 

 

 

 

 

 

PLAY LED will light up

 

RECORD

 

 

PLAY LED will light up

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RECORD button LED

 

 

 

 

 

RECORD LED will blink

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

<Hints>

If you are rehearsing over and over, an effective time-saver is to use the Auto Return function along with the Auto Play function.

As shown in the diagram below, specifying the Start and End points for the Auto Return and Auto Play functions allows you to easily rehearse as many times as you like. This enables you to pay more attention to the recording level and your own performance. Refer to pages "71" for more information on setting the Start/End points for the Auto Return/Auto Play functions.

AUTO PUNCH IN point

AUTO PUNCH OUT point

AUTO RTN START point

 

AUTO RTN END point

 

 

 

 

 

 

 

 

Rehearsal will be repeated automatically as many times as

you like to make it easier to adjust the recording level.

1-3. Auto Punch In/Out Take mode (actual recording)

Proceed to recording after rehearsal.

Take

1.Check to see which tracks are in ready mode.

Please note that data will be recorded in all tracks set to ready mode.

2.As in Rehearsal mode, locate the point just before the Punch In point.

3.Auto Punch mode is "on".

4.Press the RECORD button while pressing and holding down the PLAY button.

The REHEARSAL LED (green) will go off and the TAKE LED (red) will light up.

5.Play the guitar while listening to the playback sound.

As shown in the illustration below, the recorder will start recording automatically at the Punch In point, and stop recording at the Punch Out point.

79

Page 79
Image 79
Fostex D-160 owner manual Auto Punch In/Out Take mode actual recording, Check to see which tracks are in ready mode