Fostex D-160 owner manual Undo/Redo of Auto Punch In/Out, Take mode Auto Punch In/Out

D-160 Owner's Manual (Punch In/Out)

*When recording is finished, the Auto Punch mode will be canceled, and both REHEARSAL and TAKE LEDs will go off.

Take mode (Auto Punch In/Out) AUTO PUNCH IN point AUTO PUNCH OUT point

All tracks are under REPRO

monitoring status.

Only Track 3 enters INPUT monitoring status. (Unlike in Rehearsal mode, the D-160 will record data.)

All tracks are under REPRO

monitoring status.

Refer to "Caution after Punch

Out" for details.

RECORD TRACK display		3	Blink		3	Light up		3	Blink
REHEARSAL LED	TAKE LED will light up			TAKE LED will light up			Both LEDs will go off
TAKE LED
PLAY button LED				PLAY
	PLAY				PLAY LED will light up		PLAY
RECORD button LED		PLAY LED will light up		RECORD				PLAY LED will light up
					RECORD LED will light up

<Caution after Punch Out>

At "Take" of punch out, the punch-in recording track will not immediately enter the repro monitor mode from the input monitor mode but enter the repro monitor mode about two seconds after mute playback.

This is a functional feature of D-160 and not a malfunction.

1-4. Undo/Redo of Auto Punch In/Out

*If you press the UNDO key after performing the auto punch in/out operation, the original sound recorded prior to auto punch in/out will be restored.

*If you press the REDO key after undoing the auto punch in/out operation, the auto punch in/out data will be restored.

<Note>

You can use the undo/redo functions while the D-160 is in stop mode.

Under the following circumstances, you will be unable to use the undo/redo functions; 1. If you make a new recording,

2. If you make a new edit (copy & paste, move & paste, or erase),

3. If the Auto Punch In point was passed in play or record mode while Auto Punch mode was on, or

4. If you turned off the power to the D-160, then turned it back on.

5. If you use the Program Change function.

80