Fostex D-160 owner manual Punch In/Out Take manual Punch In/Out, Take mode manual Punch In/Out

D-160 Owner's Manual (Punch In/Out)

<Hints>

When you are rehearsing over and over, an effective time-saver is to use the Auto Return function along with the Auto Play function.

As shown in the diagram below, specifying the Start and End points for the Auto Return and Auto Play functions allows you to easily rehearse as many times as you like. In this way, you can pay more attention to the recording level and your own performance. Refer to pages "71" for more information on setting the Start/End points for the Auto Return/Auto Play functions.

PUNCH IN point	PUNCH OUT point
AUTO RTN START point		AUTO RTN END point

Rehearsal will be repeated automatically as many times as you

to make it easier to adjust the recording level.

2-2. Punch In/Out Take (manual Punch In/Out)

1.Locate the point just before the punch in point and play back the data.

2.Play the guitar while listening to the playback.

3.Press the foot switch once at the punch in point, and press it again at the punch out point.

When you finish punch out recording, the D-160 will quit recording mode.

Take mode (manual Punch In/Out) PUNCH IN point PUNCH OUT point

All tracks are under REPRO monitoring status.

Only Track 3 enters INPUT monitoring

status. (Unlike in Rehearsal mode, the

D-160 will record data.)

All tracks are under REPRO monitoring status. Refer to "Caution after Punch Out" for details.

		Press the foot		Press the foot
		switch once.		switch again.
RECORD TRACK display	3	Blink	3	Light up	3	Blink
REHEARSAL LED	Both LEDs will go off		Both LEDs will go off		Both LEDs will go off
TAKE LED
			PLAY
PLAY button LED	PLAY		PLAY LED will light up		PLAY
	PLAY LED will light up				PLAY LED will light up
			RECORD
RECORD button LED			RECORD LED will light up

83