Fostex D-160 owner manual Status Request Command, 183

=05: Possible to undo rehearsal mode.

=06: Possible to undo take mode.

=72: off

D-160 Owner's Manual (MMC/FEX List/Maintenance/Specifications)

14 07 (<fs rate>): Fs rate set command

The command for setting the current program fs (sampling frequency) at the figure indicated by <fs rate>.

14 08 (<time base>): Time base set command

The command for setting the current program time base of this equipment to that indicated by <time base>.

The Status Request Command

22 21: loop operation status request

The command inquiring the loop operation mode setup status.

D-160 will reply with "32 21 (<loop op.mode=12>)."

22 22: loop on/off status request

The command inquiring the loop on/off (=ON/OFF of AUTO RETURN) setup status. D-160 will reply with "32 22 (<on/off>)."

22 28: post locate status request

The command inquiring the post locate mode (ON/OFF of AUTO PLAY) setup status. D-160 will reply with "32 28 (<post locate mode>)".

22 2D: auto rec status request

The command inquiring the auto rec mode setup status and this is replied by "32 2D (<edit message>)." Reply from D-160 against this status request will be either one of the following:

<edit message>

22 41: lock status request

The command inquiring the slave on/off setup status and the lock status. D-160 will reply with "32 41 (<lock status>)."

22 42 : lock mode status request

The command for inquiring the lock mode setup status and this is replied with "32 42 <lock mode>."

22 45: copy clip status request

The command inquiring the clipboard condition. If there is a copy paste data in the clipboard, D-160 will reply with "32 45 (<edit message=01>)." If data in the clipboard is for move paste or there is no valid data in it, it will reply will "32 45 (<edit message=14 (void data)>)."

22 46: copy paste status request

The command inquiring execution status of copy paste editing.

When this command is received, D-160 will reply with either "32 46 (<edit message=02> <mmc time>)" or "32 46 (<edit message=00>)." <mmc time> indicates unprocessed time until completion.

22 47: erase status request

The command inquiring execution status of erase.

When this command is received, D-160 will reply by either "32 47 (<edit message=02> <mmc time>)" or "32 47 (<edit message=00>)." <mmc time> indicates unprocessed time until completion.

183