Fostex D-160 owner manual Hints, Changing the stored Start / End points

D-160 Owner's Manual (Locate function)

Changing the stored Start / End points

1, 3 3

	D-160	AUTO RTN
DIGITAL MULTITRACK RECORDER			CLIPBOARD			AUTO PUNCH				EXECUTE	EXIT
		AUTO PLAY	IN	OUT	START	IN	OUT	END	DISP SEL	/YES	/NO
						AUTO RTN			TIME BASE SEL
		COPY	MOVE		PASTE	ERASE	UNDO	REDO	HOLD/	STORE	RECALL

AUTO

PGM CHANGE

1

REHEARSAL

PUNCH

LOCATE

VARI PITCH

TAKE

RECORD TRACK

RECORD

STOP

PLAY

REWIND

F FWD

1/9

2/10

3/11

4/12

5/13

6/14

7/15

8/16

SHIFT

PUNCH

IN / OUT

LOCKED

HD ACCESS

MTC IN

CLIPBOARD PLAY

LOCATE ABS 0

LOCATE ABS END

2

1.Press the RECALL key, and then the AUTO RTN START key or AUTO RUN END key. (As a short-cut, you can press the AUTO RTN START key or AUTO RTN END key directly.)

The display will show the time value stored at the key, and the unit will enter the edit mode.

2.Move the cursor to the time value (bar) using the HOLD/> key or SHUTTLE dial, and use the JOG dial to change the value.

3.Press the STORE key, then press the AUTO RTN START key or AUTO RTN END key.

The edited time value will be stored as the Start point or End point.

<Note>

Pay attention to the location of the Start and End points. If you have set a larger value to the Start point than the End point while both Auto Return mode and Auto Play mode are on, the D-160 will jump to the Start point and continue to play the rest of the data after playing to the End point (which is located before the Start point).

Therefore, the repeat operation (explained later) will not be carried out correctly). The Auto Return mode is effective only when the unit is in play mode.

<Hints>

If " Resolution?" menu (bar/beat resolution mode) has been turned on in the Setup mode when the "BAR/BEAT/CLK" Time Based is being used, press the HOLD/> key or the STORE key to hold the current bar/beat clock value on the display, and you can round off the clock value to "00" (that is, to a bar/beat value).

This function is useful when you wish to use the memory data in beat steps.

Refer to page "160" for more information on Resolution menu in Setup mode.

73