Fostex D-160 owner manual

D-160 Owner's Manual (Names and Functions)

SCSI device connection error: (The SCSI device is not connected correctly.)

Action to take:

Check to see if the external SCSI device is connected to the SCSI connector correctly, or the power to the SCSI device is turned on.

OL
0
3
6
9
12
18
24
30
42
∞
_	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16

Disk Lock error: (The hard disk is not installed correctly, or not securely locked by the key.)

Action to take:

Install the hard disk correctly or confirm that the disk is set properly, and be sure to lock it using the included key.

OL
0
3
6
9
12
18
24
30
42
∞
_	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16

In rare case, the "No Disk IDE" will also be displayed if the cartride connector pins are soiled. In such a case, clean the connector pins with alcohol or its equivalent.

When cleaning, however, be extremely careful not to generate static electricity.

SCSI save error: (Occurrence of an error during execution of save into SCSI equipment)

Action to take:

Because "Retry?" will be displayed when the EXIT/NO key is pressed, if save is to be executed again, press the EXECUTE/YES key upon display of "Retry?."

If save is to be canceled at this stage, press the EXIT/NO key again.

OL
0
3
6
9
12
18
24
30
42
∞
_	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16

SCSI load error: (Occurrence of an error during execution of load from SCSI equipment)

Action to take:

Because "Retry?" will be displayed when the EXIT/NO key is pressed, if loading is to be executed again, press the EXECUTE/YES key upon display of "Retry?." If loading is to be canceled at this stage, press the EXIT/NO key again.

OL
0
3
6
9
12
18
24
30
42
∞
_	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16

31