Fostex Setting a digital mixer, Setting the D-160, Select a Program, Set a sampling rate

D-160 Owner's Manual (Recording/Playback)

Setting a digital mixer

1. Select the internal clock (INTERNAL).

2. Set the mixer so that it will be able to accept a digital input signal.

* Refer to the instruction manual that came with the external digital device.

Setting the D-160

1. Select a Program.

* Refer to “2-2. Program Change” for the procedure and details.

2. Set a sampling rate.

Set the sampling rate of the D-160 to that of the digital mixer.

* Refer to “2-4. Setting a sampling rate” for the procedure and details.

3. Set the digital input track in Setup mode according to the type of the digital input signal.

*Refer to “2-15. Digital input track setting in Setup mode” on page "157" for the procedure and details.

4. Set the digital output signal in the digital output track parameter in Setup mode.

*Refer to “2-16. Digital output track setting in Setup mode” on page "159" for the procedure and details.

<Note>

When you set up a digital input track, the settings for the external sync signal of the “Slave mode type setting” in Setup mode (that is, Vari, S/P DIF, adat, and Free) will be ignored, and the D-160 will sync to the specified digital input signal. Refer to “2-13. Slave mode type setting” in Setup mode on page "155" for more information.

66