TM
JTP18BABB - GE Profile™ 30" Single Wall Oven
Optional Undercounter Installation | Single Oven |
with 36" Gas Cooktop (in inches) | Dimensions (in inches) |
KW Rating
| 2 (two) 90°elbows & | |
| sufficient pipe to | |
| connect in adjacent | |
| cabinet | |
Conduit | Junction box | |
for oven | ||
|
Note: These ovens are not approved for stackable or
30
|
| |
5 |
| |
|
| |
| Cutout depth | Junction |
|
| box |
|
| location |
A |
|
|
| B |
|
240V | 3.6 |
208V | 2.7 |
Breaker Size
20 Amps†
†Note: Check local codes for required breaker size
30"
4" To
1/2" Black | Junction box in | |
adjacent cabinet | ||
iron pipe | for counter unit | |
Pressure | ||
22 | ||
regulator | ||
Union |
|
| Power cord |
for counter unit | |
valve |
|
3/4" Support |
|
Conduit | |
(48" long) |
21 |
|
Allow minimum of 21'' for clearance | 30 |
to adjacent corners, drawers, walls, or etc. |
|
Recommended cutout location
from floor
Note: Oven is rated for use only under the following cooktops:
•GE 30" and 36" electric coil and CleanDesign cooktops (Excluding Induction)
•GE 30" and 36" gas standard and sealed burner cooktops
Note: Gas or electric cooktops may be installed over this oven. See cooktop installation
Right cabinet side |
Side View
A=Allow 1" overlap of oven over top and bottom edges of cutout. B=Allow
instructions for cutout size. See label on back of oven for approved cooktop models.
Cut Opening
in Solid
Bottom
6
(Must Support 275 lbs.)
Note: If a solid bottom is used instead of the runners, a 6" x 10" rectangle must be cut out of the bottom for optimum performance
and proper air circulation.
10
6
Most 30" Wall Cabinets can be used with this unit.
Installation Information: Before installing, consult installation instructions [Pub. No.
For answers to your Monogram,® GE Profile Performance Series,™
GE Profile™ or GE appliance questions, call GE Answer Center® service, 800.626.2000.
Specification Revised 6/99
R
Listed by Underwriters Laboratories