TELESERVICES:

Buttons ∗ and # are functionbuttons, needed for divers telecom-servi- ces (teleshopping, telebanking, etc) or to control divers telecom devi- ces (PABX, answering machines, etc). Refer to the concerning manu- al.

CLIP ON CALL WAITING (only FSK based systems)

If you have subscribed to this service, the telephone will show the phone number of another incoming call while you are talking on the phone.

If you press R, the current call will be put on hold and you could talk with this second caller. Subsequent presses of button R will toggle you between these 2 callers.

In any case, the LCD will show the phone number of the first caller.

PAGING THE HANDSET(S):

You can page or locate the handset(s) by pressing on the base. The handset(s) will produce the paging tone (same as ringer melody) for 30 seconds and LCD display shows "OOOO".

You could stop the paging by pressing any key on the handset. Paging is not available when one handset is accessing the telephone line.

This feature is affected by the ringer melody, ringer volume and ringer on/off that you've programmed.

CALL TRANSFER AND NETWORK-SERVICES:

Use the R key to activate special services from your telephone-compa- ny or to transfer a call in case you are connected through a PABX. The FLASH time is adjustable. (see page 12)

OUT OF RANGE:

*You will be alerted when the handset is too far away from the base. The symbol will turn on. Bring the handset nearer the base to move it back in range.

*If you are talking on the phone, you'll hear an alert tone through the earpiece. If you fail to bring the handset back in range with the base, your call would be disconnected.

11

Page 11
Image 11
Profoon Telecommunicatie PDX-1000 Teleservices, Paging the Handsets, Call Transfer and NETWORK-SERVICES, OUT of Range