7.Set the Left Handrail (82) into the top of the Left Upright (84). Insert the Upright Wire (87) several
inches down into the top of the Right Upright
(85).Make sure that the wire tie does not fall into the Right Upright. Set the Right Handrail
(83)into the top of the Right Upright. Be careful not to pinch the Upright Wire.
Orient the Console Frame (102) as shown with the welded nuts on the bottom. Insert the ends
of the Console Frame into the top of the Left
Handrail (82) and Right Handrail (83). Attach the Console Frame with four 1/4" x 1 1/4" Patch
Bolts (9) and four 1/4" Star Washers (12). Start
all four Patch Bolts before tightening any of them.
Lift the Console Frame (102) and Handrails (82,
83)off of the Uprights (84, 85). Pull the Upright Wire (87) out of the Right Upright (85).
. Set the console assembly (A) face down on a soft surface to avoid scratching the console. Attach the Left Accessory Tray (103) with four #8 x 1/2" Screws (3). Start all four Screws be- fore tightening any of them.
Attach the Right Accessory Tray (104) as de- scribed above.
7
102
82
Welded
Nuts
8
3
A
3
104
103
10
