9. With the help of a second person, hold the | 9 | |
handrail assembly (B) upside down near the |
| |
console assembly (A), Connect the ground |
| |
wires from the console assembly to the Console |
| |
Ground Wires (6) from the handrail assembly. |
| |
Insert the console wire (C) into the track in the |
| |
console assembly (A). | B | |
Insert the Ground Wires into the hole in the con- |
| |
sole assembly (A) as you set the handrail as- | A | |
sembly (B) into the console assembly, Make | ||
| ||
sure the console wire (C) stays in the track. |
| |
Be careful not to pinch any wires. |
|
02
Ground
Wires
10.Attach the handrail assembly (B) to the console assembly (A) with two #8 x 3/4" Washer Head Screws (2). Start both Screws before tighten=
ing them. Be careful not to overtighten the
Screws.
Attach a Console Clamp (105) to the console assembly (A) with two #8 x 1" Screws (107), Start both Screws before tightening either of them. Be careful not to overtighten the Screws. Attach the other Console Clamp the same way.
Remove the wire ties from the Handrails (82, 83), Press the 5/16" Cage Nuts (38) back into place, if necessary.
10
82
83
A
11
