ProForm 831.28643.0 user manual Assembly

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the
included hex keys as well as a phillips screwdriver		, an adjustable wrench	,
and a rubber mallet	.

As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 17. The second number is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in the parts bag, check to see if it has been pre-assembled. If a part is missing, call toll-free1-888-533-1333.

M8 Split	M10 Split	Wave Washer	M8 Large
Washer (100)–4	Washer (70)–2	(95)–2	Washer (53)–10
M4 x 16mm	M4 x 22mm	M8 Nylon	M10 Nylon
Screw (66)–4	Screw (91)–2	Locknut (46)–8	Locknut (29)–4
M8 x 25mm Patch	M8 x 45mm Button		M8 x 50mm Button
Screw (22)–2	Bolt (50)–4		Screw (89)–4
M8 x 65mm Button Screw (99)–4		M10 x 52mm Bolt Set (27)–2
	M10 x 112mm Carriage Bolt (34)–4
	M10 x 88mm Button Screw (63)–2
	4