ASSEMBLY
Make sure that the power cord is unplugged. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with
Assembly requires the included allen wrenches | and your own phillips screwdriver | , | |
wire cutters | , and adjustable wrench | . |
|
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST on pages 26 and 27. The number after the parentheses shows the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to one of the parts to be assembled. If a part is missing, call
Screw | 3/4” Tek Screw | Cover Screw | Base Pad Screw |
Washer | Handrail Bolt | 1 3/4” Bolt | ||
Nut |
|
|
| |
Wheel Bolt |
| 3” Bolt |
| |
1. With the help of a second person, raise the Uprights (97) | 1 |
|
| |
to a vertical position. |
|
|
| |
|
|
|
| |
Insert the tab on one of the Handrail Brackets (81) into |
| 27 |
| |
the indicated slot in the left Upright (97). Attach the |
|
| ||
|
|
| ||
Handrail Bracket with a 3/4” Tek Screw (52). |
|
|
| |
Identify the Left Handrail Cover (27), which has holes in | 43 |
| ||
|
|
| ||
the sides. Slide the Left Handrail Cover onto the upper |
|
| 97 | |
end of one of the Handrails (43). Slide one of the |
|
| Slot | |
Handrail Caps (105) onto the lower end of the Handrail. |
| Hole | ||
Make sure that the small hole in the Handrail Cap is to- |
|
| ||
|
| 52 | ||
ward the bend in the Handrail. |
| 105 | ||
|
| Bend | 81 | |
|
|
| ||
|
|
| Small Hole | |
| 5 |
|
|
|
