ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips screwdriver 
and two adjustable wrenches 
(not included).
Extension Leg Screw (53)Ð2 | Latch Screw (35)Ð2 |
Handrail Nut (91)Ð2 |
|
Handrail Bolt (93)Ð2 | Handrail Washer (92)Ð2 |
|
1.With the help of a second person, carefully lay the treadmill on its right side. Insert one of the Extension Legs (34) into the treadmill as shown. Make sure that the Base Pad (40) is on the indicated side of the Extension Leg. Attach the Extension Leg with an Extension Leg Screw (53). Be sure to push on the head of the Extension Leg Screw while tightening it.
Attach the other Extension Leg (34) as described above.
With the help of a second person, carefully raise the treadmill to the upright position so that both Extension Legs (34) are resting flat on the floor.
2.Hold the treadmill firmly with both hands, and lower the treadmill to the floor. To decrease the possibility of injury, bend your legs and keep your back straight.
1 | 53 |
| |
34 |
|
40 |
|
34 |
|
40 | 53 |
2 |
|
5
