ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips screwdriver 
.
1.With the help of a second person, carefully raise the treadmill to the upright position. As a second person tips the treadmill to one side slightly and holds it, insert one of the Extension Legs (34) into the treadmill as shown. Make sure that the Base Pad (40) is on the indicated side of the Extension Leg. Attach the Extension Leg with one of the four Extension Leg Screws (53). Be sure to push on the head of the Extension Leg Screw while tightening it.
Attach the other Extension Leg (not shown) as described above.
With the help of a second person, carefully lower the treadmill so that both Extension Legs (34) are resting flat on the floor.
2.Hold the treadmill firmly with both hands, and lower the treadmill to the floor. To decrease the possibility of injury, bend your legs and keep your back straight.
3.Apply soapy water to the ends of the left and right Upper Body Arms (102). Slide the two Foam Grips (103) onto the Upper Body Arms.
1 |
53 |
34 |
40 |
2 |
3 | 103 |
| |
| 102 |
5
