ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips screwdriver .
Note: The underside of the treadmill walking belt is coated with
Extension Leg Screw | Latch\Handrail Screw |
1.With the help of a second person, carefully raise the Uprights (11) until the treadmill is in the position shown.
1
11
2. Insert one of the Extension Legs (34) into the treadmill | 2 |
as shown. Note: It may be helpful to tip the Uprights (11) | |
in the direction shown by the arrow, as you insert the | 11 |
| |
Extension Leg. Make sure that the Base Pad (40) is on |
|
the indicated side of the Extension Leg. Attach the |
|
Extension Leg with an Extension Leg Screw (53). Be |
|
sure to push on the head of the Extension Leg | 53 |
Screw while tightening it. | |
Next, attach the other Extension Leg (34) in the same |
|
way. |
|
| 34 |
| 40 |
5