3.Insert one of the Handrails (1) into the tube at the upper end of the right Upright (11).
3
11
1
4. Align the two holes in the Handrail (1) with the two holes |
in the Upright (11). Tighten two Handrail Screws (35) into |
the Upright and the Handrail (1). Note: It may be neces- |
sary to pull out on the sides of the Console Base (46) as |
you tighten the Handrail Screws. |
4
461
35 
Attach the other Handrail to the left Upright (not shown) |
as described above. |
11
35
5. Attach the Storage Latch (14) to the left Upright (11) with |
two Latch Screws (35). Be careful not to overtighten |
the Latch Screws. |
Bottom View
5
11 | 35 |
| |
| 14 |
6.Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 13). To protect the floor or carpet, place a mat under the treadmill.
6
