DeWalt DWS782 Three Year Limited Warranty, Troubleshooting Guide, Year Free Service

•FOR YOUR SAFETY: Registering your product will allow us to contact you in the unlikely event a safety notification is required under the Federal Consumer Safety Act.

Register online at www.dewalt.com/register.

Three Year Limited Warranty

DEWALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. This warranty does not cover part failure due to normal wear or tool abuse. For further detail of warranty coverage and warranty repair information, visit www.dewalt.com or call 1-800-4-DEWALT (1-800-433-9258). This warranty does not apply to accessories or damage caused where repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces.

In addition to the warranty, DEWALT tools are covered by our:

Troubleshooting Guide

BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS

TROUBLE!	WHAT’S WRONG?		WHAT TO DO
Saw will not	1. Saw not plugged in		1.	Plug in saw.
start	2.	Fuse blown or circuit	2.	Replace fuse or reset circuit breaker.
		breaker tripped
	3.	Cord damaged	3.	Have cord replaced by authorized
				service center.
	4.	Brushes worn out	4.	Have brushes replaced by authorized
				service center or replace them yourself.
				Refer to Brushes.

English

1 YEAR FREE SERVICE

DEWALT will maintain the tool and replace worn parts caused by normal use, for free, any time during the first year after purchase.

90 DAY MONEY BACK GUARANTEE

If you are not completely satisfied with the performance of your DEWALT Power Tool, Laser, or Nailer for any reason, you can return it within 90 days from the date of purchase with a receipt for a full refund – no questions asked.

Saw makes unsatisfactory cuts

1.	Dull blade	1.	Replace blade. Refer to Changing or
			Installing a New Saw Blade.
2.	Blade mounted	2.	Turn blade around. Refer to Changing
	backwards		or Installing a New Saw Blade.
3.	Gum or pitch on	3.	Remove blade and clean with coarse
	blade		steel wool and turpentine or household
			oven cleaner.

LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, see country specific warranty information contained in the packaging, call the local company or see website for warranty information.

FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-4-DEWALT (1-800-433-9258) for a free replacement.

	4.	Incorrect blade for	4.	Change the blade type. Refer to Saw
		work being done		Blades under Optional Accessories.
Blade does not	1. Extension cord too		1.	Replace with adequate size cord. Refer
come up to		light or too long		to Use Proper Extension Cord under
speed				Important Safety Instructions.
	2.	Low house current	2.	Contact your electric company.
Machine	1. Saw not mounted		1.	Tighten all mounting hardware. Refer to
vibrates		securely to stand or		Bench Mounting.
excessively		work bench
	2.	Stand or bench on	2.	Reposition on flat level surface. Refer to
		uneven floor		Familiarization.
	3.	Damaged saw blade	3.	Replace blade. Refer to Changing or
				Installing a New Saw Blade.

Does not make accurate miter cuts

1.	Miter scale not	1.	Check and adjust. Refer to Miter Scale
	adjusted correctly		Adjustment under Adjustments.
2.	Blade is not square	2.	Check and adjust. Refer to Miter Scale
	to fence		Adjustment under Adjustments.
3.	Blade is not	3.	Check and adjust fence. Refer to Bevel
	perpendicular to		Square to Table Adjustment under
	table		Adjustments.
4.	Workpiece moving	4.	Clamp workpiece securely to fence or
			glue 120 grit sandpaper to fence with
			rubber cement.

Material	1. Cutting bowed	1. Refer to Bowed Material under
pinches blade	material	Special Cuts.

15