Our new internet site at www.iFIT.com allows you to access a large selection of programs that interactively control your treadmill to help you achieve your specific exercise goals. In addition, you can play iFIT.com audio and video programs directly from the internet. By adding an optional upgrade module to the console, you can use virtually endless features on our internet site. Explore www.iFIT.com for details. To purchase an up- grade module, call
To use programs from our internet site, the treadmill must be connected to your home computer. See HOW TO CONNECT YOUR COMPUTER on page 14. In ad- dition, you must have at least a 58K modem and an account with an internet service provider. A list of addi- tional system and software requirements will be found on our internet site.
Follow the steps below to use a program from our internet site.
E'_ Insert the key fully into the console.
See HOWTO TURN ON THE POWER on page 10.
_ Press the PROGRAM button.
When the key is in- serted, the manual mode will be selected. To use an iFIT.com CD or video program, press the PROGRAM button repeatedly until the iFIT.com indicator lights.
_Go to your computer and start an internet connection.
_"_ Return to the treadmill and stand on the foot rails. Find the clip attached to the key and slide
the key onto the waistband of your clothing.
When the
During the program, an electronic "chirping" sound will alert you when the speed and/or incline of the treadmill is about to change. CAUTION: Always listen for the "chirp" and be prepared for speed and/or incline changes.
If the speed or incline s'ettingsare too high or too low, you can manually override the settings at any time by pressing the SPEED or INCLINE buttons on the console. However, when the next "chirp" is heard, the speed and/or incline will change to the next settings of the program.
To stop the program at any time, press the STOP button on the console. The TIME display will begin to flash. To restart the program, press the START button orthe SPEED z_ button. After a moment, the walking belt will begin to move at 1 mph. When the next "chirp" is heard, the speed and incline will change to the next settings of the program.
When the program is completed, the walking belt will stop and the TIME display will begin to flash. Note: To use another program, press the STOP button and go to step 5 on this page.
Note: If the speed or incline of the treadmill
does not change when a "chirp" is heard, make sure that the iFIT.com indicator is lit and that the TIME display is not flashing. In addition, make sure that the audio cable is properly con- nected, that it is fully plugged in, and that it is not wrapped around a power cord.
L_ Start your web browser, if necessary, and go to our internet site at www.iFlT.com.
BFollow the desired links on our internet site to select a program.
Read and follow the
[r_J Follow your progress with the LED track and the four displays.
See step 5 on page 10.
_"1 Measure your heart rate, if desired.
See step 6 on page It
r_ Follow | the | to start the | _i_ When the program is finished, remove the |
program. |
| ||
|
|
| key. |
When you start the program, an | See step 6 on page 12. | ||
down | will begin. |
| |
|
| ||
17
