5.Attach the Left Upper Body Arm (24) to the left Upright (69) with two 3 1/2” Bolts (45), two Washers (38), and two Star Washers (106) as shown. Make sure that the Left Upper Body Arm is on the indicated side of the crossbar.
Attach the Right Upper Body Arm (not shown) to the other Upright (not shown) in the same way.
Lower the Left Upper Body Arm (24) and the Right Upper Body Arm (not shown) toward the Foot Rails (98).
6.Hold the Console Base (47) near the Left Handrail (71). Attach the end of the ground wire on the Console Base to the indicated small hole in the Left Handrail with the Silver Ground Screw (75).
7.Touch the Right Handrail (72) to discharge any static. Press the end of the Upright Wire (42) into the socket in the bottom of the Console Base (47). The connector should slide easily into the socket and snap into place. If the connector does not slide easily and snap into place, turn the connector and then insert it.
5 |
| Crossbar |
| 69 | 24 |
|
| |
|
| 106 |
| 38 |
|
|
| 106 |
| 45 |
|
| 98 |
|
6 |
|
|
|
| Ground |
|
| Wire |
|
| 47 |
| Small |
|
| Hole | 75 |
|
| |
| 71 |
|
7 |
|
|
| 72 |
|
|
| 42 |
|
| 47 |
8
