![](/images/new-backgrounds/1089564/8956413x1.webp)
Defrosting | Maintenance and Cleaning |
The freezer compartment will become progressively covered with frost. This should be removed with the special plastic scraper provided whenever the thickness of frost exceeds 1 /4".
During this operation it is not necessary to switch off the power supply or to remove the foodstuffs.
However, when the ice becomes very thick on the inner liner, complete defrosting should be carried out and it is advisable to perform this operation when the appliance is empty.
)To carry out complete defrosting:
1.Disconnect the freezer from the electricity supply.
2.Remove any stored food, wrap in several layers of newspaper and store in a cool place.
3.Leave the lid open.
4.To accelerate the defrosting process place a bowl of hot (not boiling) water inside the freezer and close the lid.
5.When defrosting is completed, dry the interior thoroughly.
6.Turn the thermostat control back to a medium setting between
7.Replace the previously removed food.
Important
A temperature rise of the frozen food packs during defrosting may shorten their safe storage life.
Never use sharp metal tools to scrape off frost from the evaporator as this could damage the appliance beyond repair.
Something Not Working
Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply
Internal Cleaning
Clean the inside and accessories with warm water and bicarbonate of soda (5m1 to 0.5 litre of water).
Rinse and dry thoroughly.
NEVER use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as these will damage the surface and leave a strong odour.
External Cleaning
Wash the outer cabinet with warm soapy water.
When the Appliance is not in Use
When the appliance is not in use for long periods, disconnect from the electricity supply, empty all foods and clean the appliance, leaving the lid open to prevent unpleasant smells.
If the appliance is not working correctly, please carry out the following checks before calling out an engineer.
Defect:
Check if:
Possible cause:
Action:
Freezer not cold | Temperature of stored foods | Plug not connected correctly | Check plug and socket |
enough | increases (becomes hotter). | Defect in switch or fuse | Check fuse, call electrician |
|
| Power failure | Wait until power is restored |
Too much frost formed | Lid does not close | Lid in contact with goods in | |
| completely | freezer | lid closes correctly |
| Lot of moisture in the room | Moisture from washing | Move freezer to a room with |
|
| machine, | less moisture, or air regularly |
|
|
|
|
| Goods packed poorly | Lot of moisture from goods | |
|
|
| “How to use” |
|
|
|
|
If after all above checks there is still a fault, contact your local Service Force Centre.
Please note that proof of purchase is required for any
7