Electrical Connection

Any electrical work required lo Install this appliance should be carried out by a qualified electrician or competent person.

This appliance must be earthed.

The manufacturer declines any liability should these safety measures not be observed.

Electrical Requirements

Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate.

The appliance is supplied with a 13amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13amp ASTA approved (B51362) fuse must be used. Should the plug need to be replaced for any reason. The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow:

Earth

Blue :

Neutral

Brown :

Live

The wire coloured green and yellow must be connected to the terminal marked with the letter "E" or

by the earth symbol or coloured green and yellow.

The wire coloured blue must be connected to the terminal "N" or coloured black.

The wire coloured brown must be connected to the terminal marked "L" or coloured red.

Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

GREEN & YELLOW

E

 

13 A

N

L

 

BROWN

BLUE

 

 

CORD CLAMP

P1041

 

 

 

9

Page 9
Image 9
Zanussi ZFC 11 JE installation manual Electrical Connection, Green and Yellow Earth Blue, Brown Live