ProForm PETL49910.0 Operation and Adjustment, PRE-LUBRICATED Walking Belt, Australia, Outlet

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will dete- riorate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

This product must be earthed. If it should malfunc- tion or break down, earthing provides a path of least resistance for electric current to reduce the risk of elec- tric shock. This product is equipped with a power cord having an equipment-earthing conductor and an earth- ing plug. IMPORTANT: If the power cord is dam- aged, it must be replaced with a manufacturer- recommended power cord.

DANGER: Improper connection of the equipment-earthing conductor can result in an increased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly earthed. Do not modify the plug pro- vided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

Follow the steps below to plug in the power cord.

1.Plug the indicated end of the power cord into the socket on the treadmill.

Socket on Treadmill

Power Cord

2.If you are plugging in the power cord in Australia, go to step 3.

If you are plugging in the power cord in the UK, first press the pins on the power cord into the metal clips in the adapter as shown. Close the adapter cover over the end of the power cord and tighten the screw in the adapter. IMPORTANT: Make sure that the screw is tightened into the adapter cover. Then, go to step 3.

Screw	Adapter
	Cover
Adapter	Pins
	Metal
	Clips

3.Plug the power cord into an appropriate outlet that is properly installed and earthed in accordance with all local codes and ordinances.

UK	Australia
Outlet	Outlet

12