ProForm PFAW75070 user manual Battery Installation, Operating the Electronic Monitor

BATTERY INSTALLATION

Before the electronic monitor can be operated, two ÒAAÓ batteries must be installed. If you have not installed batteries, see assembly step 3 on page 4.

OPERATING THE ELECTRONIC MONITOR

1.To turn on the power, press the on/reset button or simply begin exercising on the AIR WALKER. The entire display will appear for two seconds. The electronic monitor will then be ready for operation.

2.Select one of the five modes:

Scan modeÑWhen the power is turned on, the scan mode will be selected automatically. The scan mode

can also be

selected by repeatedly

pressing the mode but- ton. One mode indi-

cator will show that

the scan

mode has been selected, and a second mode indi- cator will show which mode is currently displayed.

Speed, time, distance, or calories modeÑ These modes can be individually selected by repeatedly

pressing

the mode button. The

mode indi- cators will show which mode has

been selected.

(Make sure

that the scan mode is not selected.) The modes will be selected in the following order: speed, time, distance, calories, scan.

3.The monitor has an auto-off feature to turn off the power. If the pedals are not moved and the monitor buttons are not pressed for four minutes, the power will turn off automatically in order to conserve the batteries.

To reset the LCD display, press the on/reset button.

7