ASSEMBLY
Make Things Easier for Yourself
Everything in this manual is designed to ensure that the weight bench can be assembled suc- cessfully by anyone. Most people find that by setting aside plenty of time, assembly will go smoothly.
As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.
Before beginning assembly, carefully read the following information and instructions:
•Assembly requires two persons.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
•Tighten all parts as you assemble them, unless instructed to do otherwise.
•As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.
•For help identifying small parts, use the PART IDENTIFICATION CHART.
The following tools (not included) may be required for assembly:
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
• Clear tape or masking tape, and soapy water.
Assembly will be more convenient if you have a socket set, a set of
1. | Before beginning, make sure you under- | 1 |
|
|
|
|
|
|
| stand the information in the box above. |
|
|
|
|
|
|
|
| Note: Some parts described in the assem- |
|
|
|
| 1 |
|
|
| bly steps may be |
|
|
| 25 |
|
| |
| Press two Stabilizer Endcaps (17) onto the Front |
| 17 |
|
|
|
| |
| Stabilizer (4). |
| 4 |
|
|
| 25 | |
| Attach the Front Stabilizer (4) to the Front Frame |
|
|
|
|
| ||
| (1) with two M8 x 70mm Button Bolts (25), two |
| 34 |
|
|
|
| 17 |
| M8 Washers (34), and two M8 Nylon Locknuts |
|
|
|
|
| ||
| (31). Do not tighten the Locknuts yet. |
| 31 |
|
| 34 |
|
|
2. | Press two Stabilizer Endcaps (17) onto the Rear |
|
|
|
|
| ||
2 | 17 |
|
|
|
|
| ||
| Stabilizer (3). |
|
|
|
|
| ||
| Attach the Rear Stabilizer (3) to the Rear Frame |
| 25 |
|
| 3 | 34 | 31 |
| (2) with two M8 x 70mm Button Bolts (25), two |
|
|
| ||||
| M8 Washers (34), and two M8 Nylon Locknuts |
|
|
|
|
|
| 34 |
| (31). |
| 2 |
| 25 |
|
| |
| Tighten the M8 Nylon Locknuts (31) used in |
|
|
|
|
| ||
| steps 1 and 2. |
|
|
|
|
|
| 17 |
|
|
|
|
|
|
|
|
5
