ADJUSTING THE WEIGHT RESTS
To adjust the position of the Weight Rests (13), remove the Pins (34) from the Left and Right Uprights (6, 7). Raise or lower the Weight Rests to the desired position. Reengage the Pins into the Weight Rests and the Left and Right Uprights. Make sure that the
Weight Rests are at the same height.
REMOVING THE CURL BAR
To remove the Curl Bar (11), remove the Curl Pin (38) from the Leg Lever (10).
STORING THE WEIGHT BENCH
Remove the Seat Frame Knob (62) from the Seat Frame (2), and lift the weight bench to the position shown. Insert the Seat Frame Knob into the indicated hole in the Support (5) and the Seat Frame. Make sure that the Seat Frame Knob is inserted through the Seat Frame.
13 |
|
| 34 |
| 6 |
7 | 34 |
| 13 |
| 10 |
11 |
|
38 |
|
| 2 |
| Hole |
| 5 |
| 62 |
12
