Batteries Battery Clip | ProForm PFCCEL87078 specs

6.Attach the T-Handle (10) to the Upright (3) with two M6 x 16mm Button Head Bolts (54) and two M6 Black Nylon Locknuts (55).

7.The Console (6) requires two “AA” batteries (not included). Alkaline batteries are recommended.

To install batteries, first locate the battery clip under the Console (6). Insert two batteries into the battery

clip as shown. Make sure that the batteries are turned so the negative ends of the batteries

(marked “–”) are touching the springs in the battery clip.

Batteries

8. Make sure that all parts are properly tightened before you use the elliptical exerciser.	Note: There may
be some hardware left over after assembly is complete. Place a mat under the elliptical exerciser to protect the
floor or carpet from damage.

Image 8

Contents

QUESTIONS? Customer HOT Line Table of Contents Important Precautions Using the Proform 485EIt is the responsibility of the owner to Decal shown at the right has been placed on Before YOU Begin You use the ProformFront Left Side Extra parts may be included Part Identification ChartPre-attached Assembly Two peopleRemove Two adju Apply a thin film of the included grease to the axles RidgeApply Grease Batteries Battery Clip Floor or carpet from damage HOW to Exercise on the Elliptical Exerciser HOW to Adjust the Resistance Pedals Description of the Console Battery InstallationHOW to Operate the Console Maintenance Elliptical exerciser can be wiped clean with a softConsole TROUBLE-SHOOTING Mild detergent HOW to Measure Your Heart Rate Conditioning GuidelinesExercise Intensity Workout Guidelines Exercise Frequency Suggested Stretches Part LIST-Model No. PFCCEL87078 Key Qty Description R1299A Date Customer RecordModel No Serial No Page Page Ordering Replacement Parts Limited Warranty Product Warranty Registration