ProForm PFCCEX17910 user manual Assembly, Driver

ASSEMBLY

Assembly requires two persons.	Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench		and Phillips screw-
driver	.

Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers

to the quantity needed for assembly. Note: Some small parts may have been pre-attached for shipping. If a part is not in the parts bag, check to see if it has been pre-attached.

M8 Nylon	M10 Black Nylon	M8 Split	M10 Black Split
Locknut (10)–4	Locknut (63)–4	Washer (70)–4	Washer (50)–3
M4 x 16mm	M6 x 25.4mm Button		M10 x 27mm Button
Screw (66)–1	Screw (33)–1		Screw (51)–3
	M10 x 112mm Carriage Bolt (65)–4

4