9. Identify the Left Upper Body Arm (8), which is |
marked with an “L” sticker. Orient the Left Upper |
Body Arm and the left Upper Body Leg (6) as |
shown; make sure that the hexagonal holes |
in the Left Upper Body Arm are in the indi- |
cated location. |
Slide the Left Upper Body Arm (8) onto the left |
Upper Body Leg (6). Attach the Left Upper Body |
Arm with two M6 x 36mm Button Bolts (76) and |
two M6 Nylon Locknuts (77); make sure that |
the Nylon Locknuts are inside the hexagonal |
holes. |
Repeat this step for the Right Upper Body |
9
8
9
77
76 
Arm (9) and the right Upper Body Leg (6). |
Hexagonal
Holes
76 
6
77
10.Apply a generous amount of the included grease to the Pivot Axle (16). Then, apply a small amount of grease to two Wave Washers (88).
Insert the Pivot Axle (16) into the Upright (2). Slide a Wave Washer (88) onto each end of the Pivot Axle.
Slide the left Upper Body Leg (6) onto the Pivot Axle (16). Attach the left Upper Body Leg with an M6 x 16mm Patch Screw (80) and a Large Axle Cover (20). Attach the right Upper Body
Leg (6) in the same way.
10 |
| |
80 | 2 | |
| ||
20 |
| |
| 16 | |
6 | 88 | |
20 | ||
| ||
| 80 | |
| 88 | |
| Grease | |
| 6 |
10
