11. Apply a small amount of grease to a Pedal Arm | 11 |
| |
Axle (21). While another person holds the right |
| ||
|
| ||
Pedal Arm (14) inside the bracket on the right |
| 6 | |
Upper Body Leg (6), insert the Pedal Arm Axle |
| ||
80 |
| ||
through the Upper Body Leg and the Pedal | Grease | ||
| |||
Arm. | 22 | 21 | |
| |||
| 22 | ||
Then, tighten an M6 x 16mm Patch Screw (80) |
| ||
| 80 | ||
and an Axle Cover (22) into each end of the |
| ||
|
| ||
Pedal Arm Axle (21). |
|
| |
Repeat this step for the other side of the | 14 |
| |
elliptical exerciser. |
|
12.Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser.
11
