7. Orient the Rear Frame Cover (23) as shown.

7

While a second person tips the elliptical exercis-

 

er forward, attach the Rear Frame Cover to the

 

Base (1) with four M4 x 65mm Screws (91) and

 

two M4 x 16mm Self-tapping Screws (79).

23

 

 

79

 

1

 

91

8. Have a second person hold the Upright (6) near

8

the Frame (2) as shown.

 

Pull the Wire Harness (48) out of the Frame (2)

48

and insert it upward through the Upright (6).

6

Tip: Use a piece of tape or an elastic band to

 

hold the Wire Harness in place until step 14.

 

Insert the Upright (6) into the Frame (2).

2

Tip: Start all screws before tightening any of

95

them. Attach the Upright with three M8 x 16mm

95

Button Screws (95). Avoid pinching the Wire

Avoid pinching the

Harness (48) between the Upright and the

Wire Harness (48)

Frame.

during this step

 

9. Apply a generous amount of grease to the Pivot

9

 

Axle (65) and insert it into the Frame (2).

 

86

 

 

 

Orient the two Frame Covers (17) as shown.

 

 

Attach the Frame Covers to the Frame (2) with

 

 

four M4 x 16mm Screws (86).

 

2

 

 

 

17

17

 

 

Grease

 

 

86

 

 

65

 

9

 

Page 9
Image 9
ProForm PFEL05807.0 Tip Start all screws before tightening any, Button Screws 95. Avoid pinching the Wire, Wire Harness