13. Attach the Left Handlebar Cover (109) to the Console | 13 | |
(5) with three M4 x 16mm Screws (66). Attach the | ||
Right Handlebar Cover (110) in the same way. | 5 | |
See assembly step 11. Tighten the eight M6 x 16mm | ||
| ||
Tapered Button Screws (107). | 110 | |
| ||
| 109 | |
| 66 | |
14. Plug the Power Cord (96) into the Power Socket (140) | 66 | |
14 | ||
at the rear of the elliptical exerciser. | ||
| 96 | |
| 140 |
15.Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the ellip- tical exerciser.
10
